 Electromotive Systems IMPULSE® VG Series 2 crane controls have a proven track record of providing unmatched performance and reliability to the overhead material handling industry. Featuring our exclusive crane and hoist software, these third generation controls offer many features designed for ease of use and enhanced safety. For example, X-Press Programming allows a technician to quickly input the crane's basic operating characteristics. The digital keypad display with English readout makes programming and troubleshooting simple and straight-forward. Safe Operating Windows™, Load Check™, and Multi-Level Password Protection reduce the possibility of unsafe operating conditions.
With all these features and more, plus Electromotive Systems overhead material handling application experience and after market product support - you have the leading crane controls in the industry. |
| |
|
| IMPULSE® VG Series 2 Features and Benefits |
|
Safety
|
|
Slack Cable Detection
|
Identifies a slack cable condition and provides a selectable response (stop, slow down, alarm)
|
|
Roll Back Detection
|
Drive monitors brake functionality at start and stop
|
|
Torque Proving at Start
|
Drive monitors brake functionality at start and stop
|
|
Brake Check at Stop
|
Drive monitors brake functionality at start and stop
|
|
Safe Operating Windows™
|
Reduces the possibility of programming unsafe parameters
|
|
Load Check™
|
Reduces the possibility of lifting an overload
|
|
Quick Stop™
|
Reduces the possibility of crane collision
|
|
Multi-Level Password Protection
|
Limits unauthorized modification of drive parameters
|
|
Phase Loss Detection
|
In case of phase loss, brake will set immediately, retaining load
|
|
Interface Boards
|
120 V optically isolated-standard (Other voltages available as option)
|
|
UL/CUL Rated
|
Tested and certified by Underwriters Laboratory
|
|
Ground/Fault Short Circuit Protection
|
Tested and certified by Underwriters Laboratory
|
|
|
Performance
|
|
Load Float™
|
Allows a load to be held aloft at zero speed without setting the electric brake
|
|
Weight Measurement
|
Enables load to be weighed with ±5 percent accuracy (0-10VD C Output)
|
|
X-Press Programming™
|
Allows programming initial setup within seconds
|
|
Ultra-Lift™
|
Allows overspeeding with light loads or empty hook
|
|
Reverse Plug Simulation™
|
Allows operator to smoothly and quickly stop and change directions without setting brake
|
|
Micro-Positioning™
|
Allows operator to make precise, slow moves
|
|
Torque Limit at Accel/Deceleration
|
Allows for load dependent Acceleration or Deceleration
|
|
Multi-Function Input Terminals
|
For end of travel/slow down limits stops or other options
|
|
Flash ROM
|
Stores last four fault occurrences, even after power-down, for diagnostic purposes
|
|
Elapsed Time Counter
|
Indicates actual time of operation (power on or run time)
|
|
|
Reliability
|
|
Built-In Auto Tune
|
Maximizes performance and life of motor
|
|
Built-In Serial Communication
|
Provides reliable digital linkage among various crane system peripherals, including PulseStar Radio Remote Crane Controls
|
|
Operation/Fault Display
|
Simplifies setup and troubleshooting
|
|
|
|