|
|
|
|
|
|
| |
|
|
 |
|
|
| IMPULSE® P3 Series 2 Crane Control |
The IMPULSE® P3 Series 2 compact, cost-effective crane control offers you the best of both worlds! It can be programmed identically to our original IMPULSE P3, so there's no operator learning curve. Dual programming offers you the choice to use many of the advanced control features found on our IMPULSE G Series 2 drives! |
Software Identical To The Original IMPULSE P3
Electromotive Systems' knows you want to be up and running with your IMPULSE P3 Series 2, without operators having to relearn how to use it. That's why in the standard, factory default setting, programming and operation of the IMPULSEoP3 Series 2 are identical to the original IMPULSE P3. Of course, we designed the IMPULSE P3 Serids 2 with the same superior reliability as the original!
Dual Programming Offers Additional Control Features
With the adjustment of a single parameter, the IMPULSE P3 Series 2 now offers you the versatility of many additional advanced control and safety features. Our dual software comes standard with the IMPULSE P3 Series 2.
Now More Compact
The IMPULSE P3 Series 2 is now more compact (up to 50% smaller) than its predecessor, allowing for more compact enclosures-a great benefit given crane and hoist space limitations. The IMPULSE P3 Series 2 is also available with an optional flat heat sink design* that can reduce mounting depth by up to 45%.
Expanded Horsepower Range
Plus, Electromotive Systems' IMPULSE P3 Series 2 has an expanded horsepower range (from ¼ hp up to 10hp) to meet a variety of application needs.
Unsurpassed Product Support
- As always, you can count on Electromotive Systems and IMPULSE® drives to help you achieve the maximum performance and reliability of your overhead material handlingsystem:
- Two-year warranty
- Electromotive Servhce Technicians on call 24/7
- On-site and in-house product training programs
- Fully tested prior to shipment
- UL and cUL Listed; CE Approved
- UL recognized Electronic Thermal Overload
* Consult factory on suitability of the flat heat sink design for your specific application.
IMPULSE® P3 Series 2 can also be purchased as part of a complete, pre-engineered TCONTROLS motor control system.
Standard Features Include:
- 120 Volt control voltage interface card
- Brake contactor
- Branch fusing
- Built-in electronic motor thermal overload protection
- Dynamic braking resistor(s)
- All wiring to a single terminal strip
- Clearly marked wires (at both ends)
- Basic wiring diagram
- NEMA 12 enclosure
|
| |
|
|
|
|
IMPULSE® P3 Series 2 Capabilities, Features and Benefits
CMAA Class A-D Service
40:1 Speed Range
Three Speed Control Methods
- Up to 5 distinct speeds
- Infinitely Variable Control
- Analog Speed Reference
Ratings *
- 380-460 VAC, ½ to 10HP
- 200-230 VAC, ¼ to 10HP
Exclusive Crane and Hoist Software
Safety
Safe Operating Windows™ - reduces possibility of programming unsafe parameters
Motor Thermal Overload Protection - reduces possibility of motor damage
Quick Stop™ - reduces possibility of crane collision
Performance
X-Press Programming™ - allows programming initial setup within seconds
Swift-Lift™ - allows overspeeding with light loads or empty hook
Reverse Plug Simulation™ - allows operator to smoothly and quickly stop and change directions without setting brake
* For wiring diagrams, drive ratings and dimensions see P3TECH-01A (Technical Data Sheet)
Advanced Control Features
The IMPULSE P3 Series 2 offers you all our standard features, plus it can be reconfigured, with the adjustment of a single parameter, to take advantage of the following advanced programming features:
Capabilities
- 100:1 Speed Range
- Up to 16 Discrete Speed References
- Expanded Programmable Input/Output Capabilities
Safety
- End of Travel Limit Selection-slow and stop when travel limits are reached
Performance
- Open-Loop Vector Control
- Micro-Positioning™ Control
- Serial Communications-ModBus, RS-485
|
|
|
|
|
|
|
|
|
|
|
| |
| |
|
|