| IMPULSE® G+ Series 2 Crane Control |
Electromotive Systems IMPULSE® G+ Series 2 crane controls have a proven track record of providing unmatched performance and reliability to the overhead material handling industry. Featuring our exclusive crane and hoist software, these third generation controls offer many features designed for ease of use and enh`nced safety. For example, X-Press Programming allows a technician to quickly input the crane's basic operating characteristics. The digital keypad display with English readout makes programming and troubleshooting simple and straight-forward. Safe Operating Windows™, Load Check™, and Multi-Level Password Protection reduce the possibility of unsafe operating conditions. With all these features and more, plus Electromotive Systems overhead material handling application experience and after market product support - you have the leading crane controls in the industry.
Whether used as a scalar control or vector control, the IMPULSE®oG+ Series 2 is ideal for many traverse motions and hoists with load brakes. The Series 2 crane controls are ideal for use with inexpensive, NEMA A or B single-speed, squirrdl cage induction motors. |
| |
| IMPULSE® G+ Series 2 Features and Benefits |
|
Safety
|
|
Safe Operating
|
|
|
Windows™
|
Reduces the possibility of programming unsafe parameters
|
|
Load Check™
|
Reduces the possibility of lifting an overload
|
|
Quick Stop™
|
Reduces the possibility of crane collision
|
|
Multi-Level Password Protection
|
Limits unauthorized modification of drive parameters
|
|
Phase Loss Detection
|
In case of phase loss, brake will set immediately, retaining load
|
|
Interface Boards
|
120 V optically isolated-standard (Other voltages available as option)
|
|
UL/CUL Rated
|
Tested and certified by Underwriters Laboratory
|
|
Ground/Fault Short Circuit Protection
|
|
|
|
Performance
|
|
X-Press Programming™
|
Allows programming initial setup within seconds
|
|
Swift-Lift™
|
Allows overspeeding with light loads or empty hook
|
|
Reverse Plug Simulation™
|
Allows operator to smoothly and quickly stop and change directions without setting brake
|
|
Stall Prevention
|
Extends acceleration time and prevents the motor torque limits from being exceeded
|
|
Micro-Positioning™
|
Allows operator to make precise, slow moves
|
|
Torque Limit at Accel/Deceleration
|
Allows for load dependent Acceleration or Deceleration
|
|
Flash ROM
|
Stores last four fault occurrences, even after power-down, for diagnostic purposes
|
|
Elapsed Time Counter
|
Indicates actual time of operation (power on or run time)
|
|
|
|
Reliability
|
|
Built-In Auto Tune
|
Maximizes performance and life of motor
|
|
Built-In Serial Communication
|
Provides reliable digital linkage among various crane system peripherals, including PulseStar Radio Remote Crane Controls
|
|
Operation/Fault Display
|
Simplifies setup and troubleshooting
|
|